Adhesive weights
Filter
–
355 2.0 adhesive weight roll bundle with SPEEDCUT
Product number: 5000-3550-104
Optimize your workplace and work efficiently with our adhesive weight roller bundle 355 2.0 including SPEEDCUT roller holder. The following components are included:
2x SPEEDCUT roll holders (0401-0023-150)
2x steel adhesive weight rolls type 355 2.0 silver, 5 kg (5355-0057-739)
1x steel adhesive weight roll type 355 2.0 black, 5 kg (5355-0058-739)
355 adhesive weight roll bundle
Product number: 5000-3550-009
The 355 adhesive weight roll bundle contains:
3x steel adhesive weight rolls type 355 silver, 5 kg (5355-0050-739)
2x steel adhesive weight roll type 355 black, 5 kg (5355-0053-739)
355 adhesive weight roll bundle with SPEEDCUT BASIC Workstation
Product number: 5000-3550-111
The 355 adhesive weight roll bundle including SPEEDCUT BASIC Workstation is ideal for anyone who wants to combine tidiness and efficiency in their workshop. The following components are included:
1x SPEEDCUT BASIC Workstation (0401-1001-023)
3x steel adhesive weight rolls type 355 silver, 5 kg (5355-0050-739)
2x steel adhesive weight roll type 355 black, 5 kg (5355-0053-739)
adhesive weight - Typ 303, 60 g, Lead, grey
Product number: 5303-0605-701
60 gram lead adhesive bar, divided into 4 x 5 gram and 4 x 10 gram sections. Total height of the balancing weight with adhesive tape 5.0 mm, width 15 mm. NOTE: This adhesive weight does NOT comply with the EU End-of-Life Vehicle Directive 2000/53/EC and therefore may not be used on vehicles of the categories M1 and N1 within this EU directive. Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15 °C from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.
Fingerliftno
adhesive weight - Typ 330, 60 g, Lead, grey
Product number: 5330-0605-701
Each 60g bar consists of 4x5g and 4x10g sections - the perfect adhesive weights for the workshop. The weights are particularly suitable for vehicles in which the space between the brake and rim is limited. Made in GermanyAt a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15 °C from the hub direction.
Fingerliftno
adhesive weight - Typ 355, 1000×5g, steel, black
Product number: 5355-0053-739
Adhesive weight roll with 1,000 galvanized and coated steel segments of 5 g each (5 kg).
Color: black
With SPEEDLINER® adhesive tape - for residue-free removal of the adhesive weights.
With protruding protective film for easier removal before installation.
"Anti-roll-back" function of the adhesive weight in the cardboard box
Made in Germany
adhesive weight - Typ 355, 1000×5g, steel, grey
Product number: 5355-0054-739
Adhesive weight roll with 1,000 galvanized and coated steel segments of 5 g each (5 kg).
Color: titanium gray
With SPEEDLINER® adhesive tape - for residue-free removal of the adhesive weights.
With protruding protective film for easier removal before installation.
"Anti-roll-back" function of the adhesive weight in the cardboard box
Made in Germany
adhesive weight - Typ 355, 1000×5g, steel, silver
Product number: 5355-0050-739
Adhesive weight roll with 1,000 galvanized and coated steel segments of 5 g each (5 kg).
Color: silver
With SPEEDLINER® adhesive tape - for residue-free removal of the adhesive weights.
With protruding protective film for easier removal before installation.
"Anti-roll-back" function of the adhesive weight in the cardboard box
Made in Germany
adhesive weight - Typ 357, 1000×5g, zinc, silver
Product number: 5357-0050-739
Hofmann Power Weight's endless adhesive weight roll for light alloy rims Endless adhesive weights from Hofmann Power Weight are supplied with 1.000 coated zinc segments of 5 g each on a roll - easy to separate. The cardboard box is equipped with a special ""Anti-Roll-Back"" function, which prevents the end of the roll from sliding back into the box. Now also available with protruding liner for easy handling (FL=fingerlift). The adhesive weights are perfectly suited for aluminium rims or other light alloy rims. Made in GermanyOur adhesive weights roll can be ideally combined with our Hofmann Speed Cut System, which you can also find in our Amazon range. At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Picture may differ slightly from the article (additionally with fingerlift)
Fingerliftyes
adhesive weight - Typ 358, 2000×2,5g, zinc, black
Product number: 5358-0023-736
Adhesive weights alloy wheel rims, 2,000 x 2.5g roll black type358 Hofmann Power WeightYou will receive high-quality OEM adhesive weights roll by Hofmann Power Weights of type358. The balancing weights are made of zinc, are heat-resistant and enable balancing precision to within 1.25g. In addition, the balancing weights ensure a precise fit on all alloy wheel rims. The practical Hofmann Power Weight Speedliner adhesive tape also ensures easy handling during installation.Dimensions: 19x3 mm
Fingerliftyes
adhesive weight - Typ 358, 2000×2,5g, zinc, silver
Product number: 5358-0020-736
Adhesive weights alloy wheel rims, 2,000 x 2.5g roll silver type358 Hofmann Power WeightYou will receive high-quality OEM adhesive weights roll by Hofmann Power Weights of type358. The balancing weights are made of zinc, are heat-resistant and enable balancing precision to within 1.25g. In addition, the balancing weights ensure a precise fit on all alloy wheel rims. The practical Hofmann Power Weight Speedliner adhesive tape also ensures easy handling during installation.Dimensions: 19x3 mm
Fingerliftyes
adhesive weight - Typ 359, 2000×2,5g, zinc, black
Product number: 5359-0028-736
Adhesive weights alloy wheel rims, 2,000 x 2.5g roll black type359 Hofmann Power WeightYou will receive high-quality OEM adhesive weights roll by Hofmann Power Weights of type358. The balancing weights are made of zinc, are heat-resistant and enable balancing precision to within 1.25g. In addition, the balancing weights ensure a precise fit on all alloy wheel rims. The practical Hofmann Power Weight Speedliner adhesive tape also ensures easy handling during installation.Dimensions: 15x5 mm
Fingerliftyes
adhesive weight - Typ 359, 2000×2,5g, zinc, silver
Product number: 5359-0027-736
Adhesive weights alloy wheel rims, 2,000 x 2.5g roll silver type359 Hofmann Power WeightYou will receive high-quality OEM adhesive weights roll by Hofmann Power Weights of type358. The balancing weights are made of zinc, are heat-resistant and enable balancing precision to within 1.25g. In addition, the balancing weights ensure a precise fit on all alloy wheel rims. The practical Hofmann Power Weight Speedliner adhesive tape also ensures easy handling during installation.Dimensions: 15x5 mm
Fingerliftyes
adhesive weight - Typ 360, 10 g, zinc, silver
Product number: 5360-0100-201
Original part Hofmann Power Weight adhesive weight from: AUDI, MERCEDES-BENZ, CHRYSLER, LAND ROVER, ASTON MARTIN The adhesive weights have a thickness of 5.8mm (including adhesive tape) and a width of 15 mm. From 20 grams upwards the balancing weights are provided with one notch, from 35 grams with two notches, from 50 grams with three notches and from 65 grams with four notches. This makes it easier to shape the wheel to the rim radius. With lattice bar for even easier fitting to the rim. For vehicles where there is not enough installation space in the area of the brake caliper, please use the balancing weights 361. Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15 °C from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll.
Fingerliftno
adhesive weight - Typ 360, 15 g, zinc, silver
Product number: 5360-0150-201
Original part Hofmann Power Weight adhesive weight from: AUDI, MERCEDES-BENZ, CHRYSLER, LAND ROVER, ASTON MARTIN The adhesive weights have a thickness of 5.8mm (including adhesive tape) and a width of 15 mm. From 20 grams upwards the balancing weights are provided with one notch, from 35 grams with two notches, from 50 grams with three notches and from 65 grams with four notches. This makes it easier to shape the wheel to the rim radius. With lattice bar for even easier fitting to the rim. For vehicles where there is not enough installation space in the area of the brake caliper, please use the balancing weights 361. Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15 °C from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll.
Fingerliftno