Balancing compound - Typ 504, 6000 g
Product number:
0401-5504-600
Product information "Balancing compound - Typ 504, 6000 g"
The standard solution in a new design:Type 504 balancing powder is delivered in a new optimized 6kg container, which includes a measuring spoon and a reference chart for filling quantity. The balancing powder is used to compensate the static imbalance of commercial vehicles. The practical fillling chart can also be hung up. How does tyre balancing powder work?During the drive, the balancing powder is evenly distributed in the inner side of the tire. This happens thanks to the centrifugal force. If the wheel is unbalanced, the centrifugal force of the unbalanced point increases with increasing speed and the wheel starts swinging. The balancing powder settles automatically against the unbalanced area and thus compensates for the wheel imbalance. Thanks to the ability of the powder to change position, the wheels are always balanced, even if the imbalance changes.Why choose Hofmann Power Weight balancing powder?Hofmann Power Weight is considered by vehicle manufacturers around the world to be the most important supplier of balancing weights.Advantages of wheel balancing powder:No balancing machine is required for the application of the balancing powder - just take the amount of powder suggested in the table and insert it in the tire. In addition, the balancing powder allows a better driving style in terms of reduced fuel consumption and longer tyre life. Thanks to the coating of the balancing grains, the TPMS sensors and the inside of the tire can not get damaged.
Technical Information
"Balancing compound - Typ 504, 6000 g"
| Balance weight grammage gr: | 6000 |
|---|---|
| Box Packaging Quantity: | 1 |
| EAN: | 4049256146953 |
| Weight unit: | G |
| Unit to packaging type quantity: | Piece |
| Brand: | HOFMANN POWER WEIGHT |
| Customs tariff number: | 87087099 |
Measuring spoon - balancing powder
Product number: 0401-0025-018
Dosing spoon for measuring the balancing powder in the tyre. A filling table is printed on each bucket of balancing powder type 504. Our tyre fitting tools make it easier to fit and remove balancing weights and tyre valves for tyre changes. They ensure, among other things, that the tyre and rim can be separated manually without auxiliary power, that you can properly hammer in weights on motorcycle spoked wheels or that you can easily mount and dismount spoke weights.In addition to our tools for tyre changes, there are several other products that are indispensable for a high-quality wheel change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products.
MaterialsteelColourwhite
Valve core - Typ 504, balancing powder
Product number: 0401-5234-002
The special valve core prevents the penetration of balancing components into the valve.When should metal tyre valves be changed? The best thing is to change the tyres every time!The metal valves are subjected to enormous stress during their service life and are exposed to many different environmental influences. These include varying levels of ozone, solar radiation and the use of chemicals. It does not matter whether it is an Auto tyre valve, truck or bicycle or what material (rubber or metal) it is.Therefore, every time a tyre is changed in the workshop, not only the tyres and rims but also the valves should be inspected and tested. A safe driving experience can only be guaranteed with a regular check of the rim valves. Potential tyre pressure loss can be caused by defective metal or rubber valves. In addition, external damage to the rim valve or corrosion of the valve core can also be responsible.The consequences of tyre pressure loss include various safety risks, with increased tyre wear, increased rolling resistance and increased fuel consumption being among the less dangerous. However, a broken metal tyre valve can have the negative effect of increasing the braking distance and can lead to unsafe driving with the risk of losing control of the vehicle.In order to minimise the safety risk and to achieve an optimal driving experience, we advise you to have the tyre valves and rim valves checked and replaced regularly.