Tool - Sclaverand
Product number: 9-033182
The tool adapted to Sclaverand valves allows easy assembly.
Vehicle typebicycleMaterialplastic
Tyre chalk Sisa - yellow
Product number: 0401-0025-008
The marking chalk from Sisa is ideal for marking tyres after changing tyres. You will receive 12 yellow crayons with a diameter of 17.5 mm each. The chalk is non-smudgeable and unbreakable, making it absolutely suitable for use in the workshop.
Diameter in mm
17,50 mm
Colour
yellow
Tyre chalk Sisa - white
Product number: 0401-0025-007
The marking chalk from Sisa is ideal for marking tyres after changing tyres. You will receive 12 white crayons with a diameter of 17.5 mm each. The chalk is non-smudgeable and unbreakable, making it absolutely suitable for use in the workshop.
Diameter in mm
17,50 mm
Colour
white
Fixing clamp - for valve extension
Product number: 9-377700
The tightening clamp made of galvanised steel is used for professional assembly of (highly) flexible lorry valve extensions.
Spare parts kit - Sclaverand
Product number: 9-033181
The Sclaverand (Presta) replacement part set consists of a Sclaverand valve, a black plastic cap without a seal, a rim nut 6V1 and a tool.
Vehicle typebicycleCoatingnickelMaterialbrassMaterial of valve capplastic
Clip-on air chuck for motor vehicles - Torque plug - 8/7″
Product number: 9-143100
Clip-on air chuck for motor vehicles.
Open end: Constantly open - even after removal from the tyre valve due to subsequent pressure gauge.
Variant valve end
open-end
Vehicle type
passenger car, truck
Material
brass
Torque plug - Car, 6 mm, open
Product number: 9-143000
The car momentum plug nipple made of brass has a spring-loaded lever for attaching to the hose (in extension; angle = 0°) and is used for quick inflation of car and lorry tyres. The "open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application.Connection diameter: 6 mmInner diameter hose: 5 mm
Vehicle typepassenger car, truckMaterialbrassVariant valve endopen-end
Sealing washer - for tube valve, lorry, V9.05.1
Product number: 9-030753
Replacement rubber seal for the tube valve 8V1 (9-73xxxx).
Vehicle typetruckMaterialrubber
Lever plug nipple - Car, 7 mm, extra robust
Product number: 9-142400
(l) Hebelstecknippel - KFZ, 7 mm, extra robust
Vehicle typepassenger car, truckCoatingnickelMaterialbrass
Transition nipple - intermateable, with safety chain, for rotating tyre fillers
Product number: 9-132611
Filling equipment accessories for flash valves (Dunlop). Plug-in nipple adapter made of nickel-plated brass with safety chain for connecting car thumb-lock air chucks.
Vehicle typebicycle
Tool - 8V1
Product number: 9-230500
The ALLIGATOR valve catcher is made of high-quality metal and is suitable for guiding tire valves through wheel holes, whereby the handle at one end also contains a tool for removing the valve core.
Tool - universal
Product number: 9-232602
Universal valve tool for mounting and removing standard valve inserts.
Petrol station plug - Hose connection, R1/4″, car, dunlop valves, universal
Product number: 9-148500
Straight universal hold-on connector for inner thread R1/4. The combined version for car, lorry and bicycle valves (flash valve & Sclaverand) has a nickel-plated brass plug with a "closed end" function. The plug is self-closing after removing the tyre valve, so that no more air can escape. The closed mechanism is used for the direct air supply from a main line (e.g. compressor). When plugged into the valve, the plug is opened, so that the air can flow into the tyre. When removing the tyre valve, the plug closes again.
Vehicle typebicycleCoatingnickelMaterialbrassLength of valve stem in mm175 mmVariant valve endclosed-end
Sealing washer - for tube valve, V9.05.1
Product number: 9-030754
Replacement rubber seal for the tube valve 12V1 (9-71xxxx).
Vehicle typetruckMaterialrubber
Tyre bag - white
Product number: 0401-0025-005
You will receive 100 tyre bags so that you can store your summer or winter tyres protected from dirt. The tyre bags from Perfect Equipment are of high quality and are also suitable for transporting tyres or complete wheels.
Colourwhite
Wheel screw bag
Product number: 0401-0025-004
The wheel stud bag or wheel nut bag is ideal for storing small parts around the tyre change. The fabric bag is of high quality and you keep all your small parts collected in one place.
Height in mm0,5 mmLength in mm200 mmWidth (mm)150 mmColourbeige
Valve extractor - blue
Product number: 0401-0025-014
Valve extractor for quick and easy mounting and dismounting of valves. Our tyre fitting tools make it easier to fit and remove balancing weights and tyre valves for tyre changes. They ensure, among other things, that the tyre and rim can be separated manually without auxiliary power, that you can properly hammer in weights on motorcycle spoked wheels or that you can easily mount and dismount spoke weights.In addition to our tools for tyre changes, there are several other products that are indispensable for a high-quality wheel change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products.
Colourblue
Tool - single
Product number: 9-232505
Single valve screw driver for mounting and removing standard valve inserts.
Valve plug - Inner thread
Product number: 9-145651
Valve connector nipple with inner thread connection and spring-loaded clip for fixing the valve at an 25° angle - for easy inflation of car and lorry tyres. The nickel-plated brass plug features a self-closing "closed end" function after removing the tyre valve, so that no more air can escape. The closed mechanism is used for the direct air supply from a main line (e.g. compressor). When plugged into the valve, the plug is opened, so that the air can flow into the tyre. When removing the tyre valve, the plug closes again. Valve connector nipples are ideal for replacing the seal.Inner thread: 1/4-18NPT
Vehicle typepassenger car, truckCoatingnickelMaterialbrassVariant valve endclosed-end
Lever plug nipple - Car, 9 mm, extra robust
Product number: 9-142500
(l) Hebelstecknippel - KFZ, 9 mm, extra robust
Vehicle typepassenger car, truckCoatingnickelMaterialbrass
Tool - Valve retraction lever
Product number: 9-231900
The ALLIGATOR valve retraction lever is made of high-quality, sturdy plastic and is suitable for installing rubber snap-in valves in car and light truck wheels. The attachment of the valve retractor is fixed to the valve stem by means of a thread.
Water filing fitting - Hanauer Maus, nickel plated
Product number: 9-339182
With the combined water filling and deflation device “Hanauer Maus", which is made of nickel-plated brass, tractor tyres whose air/water valves are equipped with a valve core housing can be filled with water and can also be deflated.
Vehicle typetractorCoatingnickelMaterialbrassLength of valve stem in mm116 mm
Valve screwdriver - Valve core, key valve cap
Product number: 9-232640
Tool insert with key valve cap for valve screw driver. For mounting and removing standard valve inserts.
Tool - double
Product number: 9-232503
Double ended valve screw driver for mounting and removing standard valve inserts and valve inserts of earthmoving machinery.
Brush
Product number: 0401-0025-002
With the angled special brush from Perfect Equipment all assembly pastes or tyre assembly pastes can be applied to tyres and rims. The brush head has a diameter of 51.5 mm and the length of the brush is 300 mm. Our tyre fitting tools make it easier to fit and remove balancing weights and tyre valves for tyre changes. They ensure, among other things, that the tyre and rim can be separated manually without auxiliary power, that you can properly hammer in weights on motorcycle spoked wheels or that you can easily mount and dismount spoke weights. In addition to our tools for tyre changes, there are several other products that are indispensable for a high-quality wheel change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products.
Length in mm300 mm