Valve extension
Filter
–
Valve extension - bent 75°, 218 mm
Product number: 9-356070
The flexible ALLIGATOR valve extension 218 mm with steel casing enables access to hard-to-reach valves and is ideal for earthmoving machines. The highly flexible rubber hose extension withstands a pressure resistance of 70 bar. A clamp is required for installation. The flexibility (100%) of the hose ensures high breakage resistance and flexible application. Due to the bent brass connector (75°), the hose extension is also suitable for use with special rims. It should be noted that rubber valve extensions are under pressure (up to 20 bar), should not be kinked and must not rest against the rim hole. Valve extensions are not to be used together with rubber valves.
Valve extension - 175 mm
Product number: 9-370228
Lorry valve extension 174mm Alligator, 10x valve extensions lorry flexibleHighly flexible lorry valve extensions with straight connector by ALLIGATOR. When attaching the valve extension, please ensure that the rim hole is free of sharp edges to avoid damaging the valve extension while driving.Pressure range max.: 20 bar | Effective extension: 174 mm
Valve extension - 469 mm
Product number: 9-370428
The flexible valve extension 475mm from ALLIGATOR enables hard-to-reach valves to be reached and is ideal for earthmoving machines. The highly flexible hose extension made of rubber with an effective length of 469mm can withstand a pressure resistance of 70 bar. A clamp is required for assembly. The flexibility (100%) of the hose ensures a high level of break resistance and flexible use. It should be noted that valve extensions made of rubber are under pressure (up to 20 bar), should not be kinked and must not touch the rim hole. Valve extensions are not to be used together with rubber valves.
Valve extension - 294 mm
Product number: 9-333508
Valve extension flexible 294mm Alligator, 10x valve extensions flexibleFlexible valve extensions with a straight connector and a metal valve cap by ALLIGATOR. When attaching the valve extension, please ensure that the rim hole is free of sharp edges to avoid damaging the valve extension while driving.Application range: Lorries | Pressure range:
.10× Alligator Kunststoff Ventilverlängerung mit Stützrohr 150mm, eff.132mm
Product number: 9-382805
Valve extension NFZ ALLIGATOR, 10x plastic valve extensions 132mmWhite plastic valve extensions for commercial vehicles by ALLIGATOR. In addition to a support tube, the extensions also have a plastic cap with seal.Valve length: 150mm, effective extension: 132.5mm, ETRTO number: V9.16.5
Valve extension - 97,5 mm
Product number: 9-382435
Lorry valve extensions 98mm Alligator, 10x lorry valve extension plasticLorry plastic valve extensions by ALLIGATOR without support tube. The rigid extensions are effectively 98mm long and extend the valve to 105mm.ETRTO no.: V9.16.3 | Continuous operating temperature: -40°C/+80°C
Valve extension - 144 mm, swivel clamp
Product number: 9-333106
Flexible valve extension lorry 144mm Alligator, 10x lorry valve extensionLorry valve extensions with metal valve cap and swivel clamp. The extensions provide an effective extension of 144mm and are suitable up to a maximum pressure of 20bar.
Valve extension - 97,5 mm, support tube
Product number: 9-382607
Plastic valve extensions lorry Alligator, 10x valve extension 97.5mmRigid lorry plastic valve extensions by ALLIGATOR with a length of 97.5mm. The black valve extensions consist of a support tube and a plastic cap with seal.ETRTO no.: V9.16.3 | Continuous operating temperature: -40°C/+80°C
Valve extension - Rubber valve, lorry, 133 mm
Product number: 0401-5233-022
Valve extensions and accessories.How often should the rubber valves be changed?For a safe driving experience, we recommend that you also check and change the rubber valves every time you change your tyres. The car rubber valves can be damaged by various external influences. This can lead to a potential loss of pressure in the tyre valves, which represents a high safety risk. In addition, the heavy strain also shortens the service life of the rubber valves.It is therefore recommended to check the rubber valves regularly. Above all, attention should be paid to whether the rubber on the valves is brittle, whether there is corrosion on the valve core or whether the tyre valve is damaged.If broken or defective rubber valves are not replaced, various safety risks may occur. The consequences of tyre pressure loss include increased tyre wear, higher fuel consumption and increased rolling resistance. In the most dangerous case, defective rubber valves on the car lead to an extended braking distance and unsafe driving behaviour, up to the loss of control over the vehicle.For your own safety, we therefore recommend that you replace the rubber valve set. We offer a wide range of rubber valve sets for cars, vans, trucks, motorcycles, scooters, tractors and construction machinery. Please have a look at our valves. By using high quality materials such as EPDM rubber, which are highly resistant to ozone, sunlight and chemicals, we can guarantee an extended quality of life for the rubber valve RDKS.
Valve extension - 461-HFL, 480 mm
Product number: 9-351871
The flexible valve extension 480mm with 2 nuts from ALLIGATOR enables hard-to-reach valves to be reached and is ideal for earthmoving machines. The highly flexible hose extension made of rubber with an effective length of 461mm can withstand a pressure resistance of 70 bar. A clamp is required for assembly. The flexibility (100%) of the hose ensures a high level of break resistance and flexible use. It should be noted that valve extensions made of rubber are under pressure (up to 20 bar), should not be kinked and must not touch the rim hole. Valve extensions are not to be used together with rubber valves.
Valve extension - 691-HFL, 691 mm
Product number: 9-352801
The flexible valve extension 710mm with 2 nuts from ALLIGATOR enables hard-to-reach valves to be reached and is ideal for earthmoving machines. The highly flexible hose extension made of rubber with an effective length of 691mm can withstand a pressure resistance of 70 bar. A clamp is required for assembly. The flexibility (100%) of the hose ensures a high level of break resistance and flexible use. It should be noted that valve extensions made of rubber are under pressure (up to 20 bar), should not be kinked and must not touch the rim hole. Valve extensions are not to be used together with rubber valves.
Valve extension - bent 90°, with cap
Product number: 9-330905
The ALLIGATOR valve extension made of brass is especially suitable for trucks. It offers an effective extension of 77.5 mm and has a bending angle of 90 degrees. The valve extension is protected by a plastic cap.
.10× Alligator Kunststoff Ventilverlängerung mit Stützrohr 60mm, eff. 53mm
Product number: 9-381505
10x valve extension lorry 53.5mm, valve extensions tyre valve plasticRigid lorry plastic valve extensions by ALLIGATOR with a length of 53.5mm. The white valve extensions consist of a support tube and a plastic cap with seal.ETRTO no.: V9.16.1 | Continuous operating temperature: -40°C/+80°C
Valve extension - 93,5 mm, metal cap
Product number: 9-332003
10x valve extension brass lorry Alligator, metal valve extension 93.5mmThe high-quality and rigid valve extensions by ALLIGATOR are made of brass. They are suitable for use on lorries and provide an effective valve extension of 93.5mm.
Valve extension - Rubber valve, lorry, 204 mm
Product number: 0401-5233-012
10x rubber truck valve extension 204 mm Hofmann Power Weight valve extensions and accessories.