Tire Inflator and Accessories
Filter
–
Lever plug nipple - Car, 5.5 mm, extra robust
Product number: 9-142300
Extra robust car thumb-lock air chuck made of nickel-plated brass for easy inflation of tyres at 90° to the hose. By flipping the eccentric lever, the seal is pressed firmly onto the valve and thus ensures an optimal hold of the plug. The ""open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Thumb-lock air chucks are ideal for replacing the seal.Connection diameter: 5.5 mmInner diameter hose: 4.5 mm
Vehicle typepassenger car, truckCoatingnickelMaterialbrass
Lifting pin - for thumb-lock air chucks
Product number: 9-033030
Steel lifting pin for car thumb-lock air chucks. Suitable for the extra robust thumb-lock air chuck variants made of brass with and without detachable screw connection (9-142300, 9-142400, 9-142500, 9-143501, 9-143505).
CoatingzincMaterialsteel
Valve plug - Clip, hose connection, open
Product number: 9-143976
Valve connector nipple with spring-loaded clip for fixing the hose on the valve at an 25° angle - for easy inflation of car and lorry tyres. The "open end” nickel-plated brass plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Valve connector nipples are ideal for replacing the seal.Connection diameter: 6 mmInner diameter hose: 5 mm
Vehicle typepassenger car, truckCoatingnickelMaterialbrassVariant valve endopen-end
Lever plug nipple - Car, standard
Product number: 9-142200
Standard car thumb-lock air chuck made of galvanised steel for easy inflation of tyres at 90° to the hose. By flipping the eccentric lever, the seal is pressed firmly onto the valve and thus ensures an optimal hold of the plug. The ""open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Thumb-lock air chucks are ideal for replacing the seal.Connection diameter: 6 mmInner diameter hose: 5 mm
Vehicle typepassenger car, truckCoatingzincMaterialsteel
Water filing fitting - Waterboy, G3/4″, nickel plated
Product number: 9-339181
With the combined water filling and deflation device "Waterboy", which is made of nickel-plated brass, tractor tyres whose air/water valves are equipped with a valve core housing can be filled with water and can also be deflated.
Vehicle typetractorCoatingnickelMaterialbrassLength of valve stem in mm98,5 mm
Lever plug nipple - Car, 10mm, standard
Product number: 9-143501
Extra robust car thumb-lock air chuck made of nickel-plated brass for easy inflation of tyres at 90° to the hose. By flipping the eccentric lever, the seal is pressed firmly onto the valve and thus ensures an optimal hold of the plug. The "open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application. Thumb-lock air chucks are ideal for replacing the seal.Connection diameter: 10 mmInner diameter hose: 4.5 mm
Vehicle typepassenger car, truckCoatingnickelMaterialbrass
Torque plug - Car, 6 mm, open
Product number: 9-143000
The car momentum plug nipple made of brass has a spring-loaded lever for attaching to the hose (in extension; angle = 0°) and is used for quick inflation of car and lorry tyres. The "open end” plug function is constantly open even after removal from the tyre valve, so that air can flow out. The open mechanism is required for use with application equipment (e.g. tire tyre fillers with pressure gauge) so that the pressure gauge can also return to its normal unpressurised state after application.Connection diameter: 6 mmInner diameter hose: 5 mm
Vehicle typepassenger car, truckMaterialbrassVariant valve endopen-end
Water filing fitting - nickel plated
Product number: 9-339101
The water filling fitting made of nickel-plated brass is used as a fitting for connection to air/water valves.
Vehicle typetractorCoatingnickelMaterialbrassLength of valve stem in mm33,5 mm
Tyre inflator hose - 15 m, with hold-on connector
Product number: 9-289760
15 m tyre inflation hose with hold-on connector and tyre inflation connection (wing nut M16x1.5).
Valve attachment - for valve connectors
Product number: 0401-5211-001
The lever plug nipple is suitable for different tyre inflation fittings. Mounting on the hose end piece. Our tyre fillers and tyre inflation accessories convince with a modern and attractive appearance and simplify the inflation of the tyre many times over. The tyre fillers are calibrated and have a clear and simple pressure gauge. This results in easy handling and safe inflation of the summer tyre or winter tyre. Due to the high manufacturing quality of the tyre testers, a long service life is guaranteed even with daily use. Such a tyre pressure gauge is of course also suitable for tyre changes of a private nature, as it simply makes work more pleasant. In addition to the tyre fillers, you can also obtain a tyre filler replacement inner tube from us to complete your range.In addition to the various tyre fillers in our range, there are several other products that are essential for a high-quality tyre change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products.
Degree of assemblyassembledVehicle typepassenger car
Wing nut - M16x1.5, long, rotating tyre filler 7 mm
Product number: 9-158700
Wing nut M16x1.5 made of nickel-plated brass. Due to the lateral wings on the nut, the wing nuts can be easily tightened or loosened by hand. Ideal for screw connections that need to be loosened frequently, but still need to be robust.Length: 37 mmOuter diameter: 7 mmInner diameter hose: 6 mm
CoatingnickelMaterialbrassLength of valve stem in mm36,5 mm
Hose extension - 2×12V1
Product number: 9-290090
Flexible rubber hose extension with steel casing and two 12V1 connectors - for hard to reach valves of earthmoving machinery. Flexibility: 95%Valve extension insert: sealingPressure range: up to 20 barPressure resistance/burst pressure: 120 barProfessional assembly: with tightening clampBreakage resistance: very high
Vehicle typeconstruction vehicleLength of valve stem in mm295 mm
Tyre inflator
Product number: 0401-5301-001
The HOFMANN POWER WEIGHT tyre inflation valve is suitable for all standard car valves (VG8 thread). Our tyre fillers and tyre inflation accessories convince with a modern and attractive appearance and simplify the inflation of the tyre many times over. The tyre fillers are calibrated and have a clear and simple pressure gauge. This results in easy handling and safe inflation of the summer tyre or winter tyre. Due to the high manufacturing quality of the tyre testers, a long service life is guaranteed even with daily use. Such a tyre pressure gauge is of course also suitable for tyre changes of a private nature, as it simply makes work more pleasant. In addition to the tyre fillers, you can also obtain a tyre filler replacement inner tube from us to complete your range.In addition to the various tyre fillers in our range, there are several other products that are essential for a high-quality tyre change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products.
Connector - G1/4”, rotating tyre filler
Product number: 9-149981
Rotating connection G1/4. Replacement part for the rotating tyre filler (9-149979, 9-149980) for car and bicycle valves.
Vehicle typebicycle