TPMS assembly

Screw M5, Torx TX15 for car TPMS valves made of aluminium - for screwing the sensor to the TPMS valve. Vehicle typepassenger car

The small ALLIGATOR TPMS starter set offers everything you need to get started with TPMS service. The following components are included in the Mini-Starter-Kit PT1:1x ALLIGATOR programming unit PT1 (9-590922)4x universal sensor RS3 (9-590914)4x aluminium valve silver anodised (9-590906)1x operating instructions Vehicle typepassenger car

Screw M6, Torx TX20 for lorry TPMS valves - for screwing the sensor to the TPMS valve. Vehicle typetruck

Why TPMS Service Kits?Whenever a tyre is changed, the appropriate parts kit should be used to replace the wearing parts (nut, sealing ring, valve core or valve cap). Possible consequences of TPMS tool malfunctions may include Loss of pressure in the tyre, flat tyre, damage to the complete sensor or even loss of vehicle control. Why RDKS Service Kits from Hofmann?Hofmann Power Weight is the only supplier to offer 100% coverage of all new European vehicles from 2014. With RDKS sensors in OE quality the best work results are achieved. In addition, quality seals guarantee maximum resistance even under extreme conditions. The individual metal components are also treated with the latest corrosion protection technology.Mounting tips TPMS tool:Before installation, check whether the vehicle is already equipped with a direct tyre pressure monitoring system.During the disassembly of the RDKS sensor, no pressure must be applied to the tyre pressure sensor.If the sensor can still be used, the appropriate TPMS Service Kit must be determined.For mounting the tyre pressure monitoring system kit, please use nickel-plated valve cores and valve caps with sealing ring.If you screw the new valve to the RDKS sensor, the correct torque must be observed. Degree of assemblyassembledDrive size in inches1/4 InchContents13

The large ALLIGATOR TPMS starter set is ideal for anyone who wants to get started in TPMS service. The Tool Bundle PT3 contains the following components: 1x ALLIGATOR programming/diagnostic device PT3 (9-030229) 24x universal sensor RS3 (9-590914) 24x aluminium valve silver anodised (9-590906) 1x operating instruction     Vehicle type passenger car

The StarterSet for tyre pressure monitoring systems (RDKS, TPMS) has a wide range of common service kits. With this selection of service kits, over 85% of all new European vehicles can be covered. The equipment of the RDKS StarterSet has been optimised according to requirements and includes the following ServiceKits: 4 pieces ServiceKit for Schrader Gen4 sensors (Peugeot, Opel, Hyundai, Citroen, Chevrolet) (Schrader no.: 66118-68, 5026) 8-piece Service Kit for Schrader Gen2 sensors (Renault) (Schrader no.: 65655-KD, 5002) 8-pieces ServiceKit for Schrader Gen2 sensors (Lotus, Nissan, Volvo, Opel, Chevrolet, Peugeot) (Schrader no.: 65657-KD, 5004) 16-piece ServiceKit for Schrader Gen Alpha Sensors (Mercedes-Benz, Smart, Dodge, Jeep) (Schrader no.: 65962-KD, 5017) 8-piece ServiceKit for Conti TG1B sensors (Ford, Volvo, Mazda, Jaguar, Citroen, Fiat, Lancia, Land Rover, Peugeot) (Schrader no.: 65659-KD, 5006) 8-piece ServiceKit for Conti TG1C sensors (Renault) (Schrader no.: 65963-KU, 5018) 8-piece ServiceKit for Conti TG1C sensors (Madzda) (Schrader no.: 66072-KU, 5022) 8-piece ServiceKit for Conti TG1C sensors (Hyundai, Kia) (Schrader no.: 66071-KU, 5021) 8-piece ServiceKit for Conti TG1C sensors (Volvo, Ford, Jaguar, Land Rover) (Schrader no.: 66070-KU, 5020) 4-piece Service Kit for HUF Gen1 Sensors valve length: 43 mm (Audi, VW, BMW, Porsche) (Schrader no.: 65731-67, 5009) 16-piece Service Kit for HUF Gen2 Sensors (Audi, VW, BMW, Porsche) (Schrader no.: 65731-67, 5009, 65732-67, 5010, 65733-67, 5011, 65734-67, 5012) 8 Piece ServiceKit for Pacific Gen3 sensors (Nissan, Infiniti) 25 pcs. valve core, nickel-plated, suitable for all vehicles 25 pcs. valve cap, plastic, grey. Tightening torque of valve core in Nm0,25 NmMaterial of valve capplastic

The PT1 starter kit offers the perfect introduction to TPMS service. The set includes the following components:1x ALLIGATOR programming unit PT1 (9-590922)8x universal sensor RS3 (9-590914)8x aluminium valve silver anodised (9-590906)1x operating instructions Vehicle typepassenger car

The ALLIGATOR Sensor RS4 is the snap-in version of the popular RS3. It can be used in vehicles which already delivered with a RDKS rubber valve variant in the factory and whose maximum design speed does not exceed 210 km/h. Sensor and valve are connected by using a patented clip-pin mechanism. This makes it easier than ever to replace the valve every time you change a tire. ALLIGATOR - Evolution of Air Control. CE CertificationyesFCC CertificationyesIC Certificationyes