Product number: 0401-0023-233
Product information "Valve - snap-in, TR412, V2.03.6, unassembled, passenger car"
Rubber valve from Perfect Equipment: Variant: unmounted ETRTO: V2.03.6 Valve height in mm (without cap): 33 Ø valve hole in mm: 11.3 packaging units: 100-piece. Note: Maximum working pressure at room temperature: 4.5 bar. Use clamp-in valves at speeds above 210 km/h.How often should the rubber valves be changed?For a safe driving experience, we recommend that you also check and change the rubber valves every time you change your tyres. The car rubber valves can be damaged by various external influences. This can lead to a potential loss of pressure in the tyre valves, which represents a high safety risk. In addition, the heavy strain also shortens the service life of the rubber valves.It is therefore recommended to check the rubber valves regularly. Above all, attention should be paid to whether the rubber on the valves is brittle, whether there is corrosion on the valve core or whether the tyre valve is damaged.If broken or defective rubber valves are not replaced, various safety risks may occur. The consequences of tyre pressure loss include increased tyre wear, higher fuel consumption and increased rolling resistance. In the most dangerous case, defective rubber valves on the car lead to an extended braking distance and unsafe driving behaviour, up to the loss of control over the vehicle.For your own safety, we therefore recommend that you replace the rubber valve set. We offer a wide range of rubber valve sets for cars, vans, trucks, motorcycles, scooters, tractors and construction machinery. Please have a look at our valves.
"Valve - snap-in, TR412, V2.03.6, unassembled, passenger car"
|Norm TR:||TR 412|
|Manufacturer article number:||TR412 UNASSEMBLED|
|Valve stem length A:||33.0|
|Speed km/h max:||210.0|
|Pressure bar max:||4.5|
|Customs tariff number:||84818040|
|Valve stem material:||brass|
|Box Packaging Quantity:||100|