Adhesive Weights
Whether bar or roll, steel or zinc, ultra-strong hold or residue-free removal – here you'll find the right adhesive weight for every rim and every need.
The differences lie in the details – and these often make the crucial difference in everyday workshop life. If you want to balance quickly and without hassle, you should choose the adhesive tape, material, and fit carefully.
adhesive weight - Typ 398, 60 g, steel, silver
Article number: 3398-0601-551
Color:
Shiny silver
|
Material coating:
galvanized
Adhesive bar for light alloy rims steel adhesive weight bar galvanised by Perfect Equipment with 5 g / 10 g subdivision. Now also available with protruding liner for easy handling (FL=fingerlift). Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.Then you can remove the protective foil of the adhesive weights or balancing weights and stick the weight in the middle of the intended place. Press the weight firmly from the middle to the outer ends - the pressure on the adhesive weights must be at least 10 N/cm².
Fingerliftyes
Price after login
adhesive weight - Typ 397, 60 g, steel, silver
Article number: 3397-0601-551
Color:
Shiny silver
|
Material coating:
galvanized
Adhesive balancing weights adhesive bars for light alloy rims adhesive weight bars galvanised by Perfect Equipment with 5 g subdivision. Now also available with protruding liner for easy handling (FL=fingerlift). Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.Then you can remove the protective foil of the adhesive weights or balancing weights and stick the weight in the middle of the intended place. Press the weight firmly from the middle to the outer ends - the pressure on the adhesive weights must be at least 10 N/cm².
Fingerliftyes
Price after login
adhesive weight - Typ 398, 60 g, steel, black
Article number: 3398-0601-751
Color:
Black
|
Material coating:
Galvanized + powder coated
Balancing weights adhesive bars for light alloy rims steel adhesive weight bars from Perfect Equipment with 5 g / 10 g subdivision. Now also available with protruding liner for easy handling (FL=fingerlift). Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.Then you can remove the protective foil of the adhesive weights or balancing weights and stick the weight in the middle of the intended place. Press the weight firmly from the middle to the outer ends - the pressure on the adhesive weights must be at least 10 N/cm².
Fingerliftyes
Price after login
adhesive weight - Typ 398, 60 g, steel, silver
Article number: 3398-0601-251
Color:
Silver
|
Material coating:
Galvanized + powder coated
Steel adhesive weight bolt from Perfect Equipment with 5 g / 10g - subdivision. With protruding liner for easier handling (FL=fingerlift). Measurements: Width 19 mm, height: 3.8 mm (incl. adhesive tape) Segmentation: 4 x 5 g and 4 x 10 g (60 g) VPE: 100 Pieces Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.Then you can remove the protective foil of the adhesive weights or balancing weights and stick the weight in the middle of the intended place. Press the weight firmly from the middle to the outer ends - the pressure on the adhesive weights must be at least 10 N/cm².
Fingerliftyes
Price after login
adhesive weight - Typ 13, 60 g, Lead, grey
Article number: 4313-0602-551
The Perfect EQUIPMENT uncoated lead adhesive bar is especially suitable if only a small installation space is available between brake system and rim. Developed in Germany. Made for the world.
Fingerliftno
Price after login
adhesive weight - Typ 371, 60 g, zinc, silver
Article number: 3371-0601-251
Color:
Silver
The endless adhesive weight roll for light alloy rims zinc endless adhesive weights from Perfect Equipment with 100 silver coated zinc segments 5 g each on roll. Easy to remove. Now also available with protruding liner for easy handling (FL=fingerlift). Particularly suitable for adhesive weights on alloy or light alloy rims. The perfect adhesive weights for the workshop - the adhesive weight bar with 12 segments each 5 g (60 g), with a height of only 3.8 mm incl. adhesive tape at a width of 19 mm can also be used for narrow installation spaces on car rims. These lead balancing weights are ideal for balancing car tyres. Made in GermanyCan’t find the right impact weight? Then take a look at our extensive range of impact and adhesive weights. Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.
Fingerliftyes
Price after login
adhesive weight - Typ 397R, 1000×5g, steel, silver
Article number: 3397-0051-259
Color:
Silver
|
Material coating:
Powder coated
Steel endless adhesive weight with 1,000 segments of 5 g each on a roll.
Easily cut.
Equipped with protruding liner (Fingerlift) for easy handling.
Color: silver
Material: steel, coated
Price after login
adhesive weight - Typ 3, 60 g, Lead, grey
Article number: 4303-0602-551
The Perfect EQUIPMENT uncoated lead adhesive bar is especially suited for rims with a small width of the balancing track. Can also be used for motorcycle rims. Developed in Germany. Made for the world.
Fingerliftno
Price after login
adhesive weight - Typ 397R, 1000×5g, steel, black
Article number: 3397-0051-759
Color:
Black
|
Material coating:
Powder coated
Steel endless adhesive weight with 1,000 segments of 5 g each on a roll.
Easily cut.
Equipped with protruding liner (Fingerlift) for easy handling.
Color: black
Material: steel, coated
Price after login
adhesive weight - Typ 397, 1000×5g, steel, silver
Article number: 3397-0051-559
Color:
Shiny silver
|
Material coating:
galvanized
Adhesive weight roll for light alloy rims steel continuous adhesive weight from Perfect Equipment with 1.000 segments of 5 g on roll. Easy to remove. Now also available with protruding liner for easy handling (FL=fingerlift). Particularly suitable for adhesive weights on alloy or light alloy rims. Made in GermanyWhy should you balance tyres at all?At a speed of 100 km/h the centrifugal force of a 10 g unbalance acts like the force of a sledge hammer. This makes wheels without balancing weights a danger: Without adhesive weights on steel and aluminium rims, wheel suspensions and bearings are subjected to greater stress. Missing balancing weights on steel and aluminium rims can also lead to noticeable vibrations at the steering wheel and in the interior. In addition, non-existent adhesive bars result in increased brake and tyre wear.Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.Then you can remove the protective foil of the adhesive weights or balancing weights and stick the weight in the middle of the intended place. Press the weight firmly from the middle to the outer ends.
Fingerliftyes
Price after login
adhesive weight - Typ 371R, 1000×5g, zinc, silver
Article number: 3371-0051-259
The endless adhesive weight roll for light alloy rims zinc endless adhesive weights from Perfect Equipment with 100 silver coated zinc segments 5 g each on roll. Easy to remove. Now also available with protruding liner for easy handling (FL=fingerlift). Particularly suitable for adhesive weights on alloy or light alloy rims. These balancing weights are ideal for balancing passenger car tyres. Made in GermanyHave you not yet found the right balancing weight? Then take a look at our extensive range of impact and adhesive weights. Assembly of adhesive weights:Basically the rim surface must be free of grease, silicone, dust and dry before mounting the adhesive weights. The processing temperature of the adhesive weights must not fall below 10 °C and the surface for attachment to the rim must not exceed a maximum bevel of 15°C; from the hub direction.Then select the required grammage of the adhesive weights and, if necessary, separate the balancing weights from the adhesive bar or the adhesive weight roll. Then carefully bend the adhesive weight slightly smaller than the rim radius and adjust to the rim radius.
Fingerliftyes
Price after login
More speed, less hassle –
The right adhesive tape is crucial
Anyone who balances wheels on a daily basis will be familiar with the problem: stubborn residue on rims, adhesive weights falling off, or annoying complaints after changing the wheel. The right adhesive tape is crucial. HOFMANN POWER WEIGHT adhesive weights, with their various adhesive tapes, offer smart solutions for everyday workshop use.
Our top adhesive tapes: SPEEDLINER & ULTRALINER adhesive tape
For everyone who needs to work quickly and efficiently:
The Speedliner adhesive tape can be removed without leaving any residue. This saves time and effort. Nerves.
The Speedliner adhesive tape can be removed without leaving any residue. This saves time and effort. Nerves.
Speedliner Advantages:
- Residue-free removal
- High final adhesive strength at OE level
- Easy removal of the liner thanks to the protruding protective film (finger lift)
50% time savings -
Enter your own conditions now and calculate your benefit!
Bestselling Adhesive Weight: Type 355
The Type 355 adhesive weight is one of the most commonly used adhesive weights in everyday workshop use. Made of steel, it is suitable for a wide variety of vehicles and rims. Available as a bar or roll, with various adhesive tape options, and in silver, black, and titanium gray – to suit your application!
Adhesive weight pliers
Article number: 0401-0025-017
HOFMANN POWER WEIGHT premium tool for easy removal of adhesive weights
With optimized ergonomic handling
Effortless removal of adhesive weights thanks to good leverage
Special shape prevents scratching of the rim
Original part made from high-quality tool steel
Suitable for adhesive weights up to 20 mm wide.
Price after login
Scraper - Adhesive weights
Article number: 0401-0025-009
The plastic scraper has a blade width of 21.5 mm and ensures easy and gentle removal of adhesive weights and adhesive residues. Our tyre fitting tools make it easier to fit and remove balancing weights and tyre valves for tyre changes. They ensure, among other things, that the tyre and rim can be separated manually without auxiliary power, that you can properly hammer in weights on motorcycle spoked wheels or that you can easily mount and dismount spoke weights. In addition to our tools for tyre changes, there are several other products that are indispensable for a high-quality wheel change. These include, for example, adhesive weights / impact weights, tyre irons, tyre valves / rim valves and TPMS sensors. You will find all products from this area in the usual high quality in our range of products.
ColourredMaterialplastic
Price after login
Roll holder - Speed-Cut
€40.74*
Article number: 0401-0023-150
Roll holder for all HOFMANN POWER WEIGHT adhesive weight rolls with integrated weight scale and innovative cutting device for fast and safe working. The adhesive weights roll holder can be multifunctionally mounted on the balancing machine or on the wall. The matching floor stand allows flexible positioning of the balancing weight roll holder. Floor stands and castors are also available separately from us. What is the Speedcut?
Speedcut is a workshop-optimised system for storing and cutting adhesive weight rolls. The new multifunctional adhesive weight rolls from Hofmann Power Weight guarantee simplified storage, because with one adhesive weight roll you always have the right weight. Additionally, the rolls are equipped with Speedliner adhesive tape. Hofmann Power Weight engineers have developed the Speedcut, a roll holder for professionals, for professional use in the workshop. Adhesive weights rolls and Speedcut are perfectly matched to each other and thus offer the best working results. The adhesive weights rolls type 355, 356, 357, 358 and 359 fit into the Speedcut-System.
Intelligent technology:
The cardboard box of the adhesive weights rolls is equipped with an ""anti-roll-back"" function, which prevents the end of the roll from sliding back into the box. The balancing weight roll in a cardboard box can be used immediately and has a trade-optimised packaging size as well as environmentally friendly packaging without plastic.
The Speedliner technology enables the adhesive weight to be removed from the rim without leaving any residue. In addition, the liner can be easily removed and the balancing weights have a higher initial adhesive strength.
Material
steel
Colour
blue